Natural Chemistry Instant Pool Conditioner

Natural Chemistry Instant Pool Conditioner
Item # Item Description Price Qty
85020089 Natural Chemistry Instant Pool Water Condtnr 1gal

Instant Pool Conditioner

by Natural Chemistry®

Instant Pool Conditioner is used for stabilizing chlorine from sunlight loss in swimming pools. Unprotected chlorine in swimming pool water can be 95% degraded in just two hours of direct sunlight. Chlorine will last many times longer in pool water properly conditioned and stabilized with Instant Pool Water Conditioner. 

Regular cyanuric acid with a pH of 2.8 is very acidic and it can take four to seven days to dissolve. This can cause damage to the pool surface or circulation system depending on the method of application. Until it is dissolved, dry cyanuric acid will not protect chlorine from UV loss. 

Natural Chemistry's Instant Pool Water Conditioner is not an acid (it's a salt) and it has a pool-friendly pH of about 8.0. Add it to the pool and an instant later it is dissolved and ready to protect your chlorine. 

Natural Chemistry Instant Pool Conditioner Directions for Use

One gallon of Instant Pool Water Conditioner will raise the conditioner/stabilizer level in 10,000 gallons (38,000L) of water by 32ppm. The recommended minimum conditioner/stabilizer level necessary to stabilize chlorine from sunlight loss is 30ppm.

Dosage for fresh water start-up (no conditioner/stabilizer present):

  1. Divide pool volume in gallons by 10,000 gallons to determine the number of gallons of Instant Pool Water Conditioner required


  3. With circulation pump running, pour Instant Pool Water Conditioner into pool skimmer slowly OR pour directly into pool water while walking around perimeter of the pool. Brush to speed absorption

  4. Rinse container with pool water and shake

  5. Pour remaining rinse solution into skimmer or pool

Maintenance Dosage: Measure CYA level in pool using a cyanuric acid test or have it tested by a professional pool products supplier. If CYA level is less than 30ppm, calculate gallons of Instant Pool Water Conditioner needed using the following formula: 4oz added to 10,000 gallons = 1ppm increase of conditioner/stabilizer level