Expoxybond Pool Putty is a unique two-part, hand-moldable epoxy putty specially formulated for concrete or Gunite pool repairs. This pool putty is easy to use - just cut, mix, and fix! There is no need to drain pools to repair leaks and cracks because this pool putty hardens under water. Once cured, it will not shrink or sag. One year limited warranty.
Coverage: One two-part set of pool putty will cover approximately 11.7 cubic inches or .0067 cubic feet.
Mixing and Application for Under Water Repairs
Area to be repaired must be free of loose particles, slime, and algae.
Mix equal amounts of Resin and Hardener thoroughly, above water, until pool putty is uniform in color.
For best adhesion, press pool putty firmly into areas requiring repair.
Mixing and Application for Above Water Repairs
Area to be must be thoroughly cleaned. Remove grease, loose particles, and rust. For best adhesion, roughen surface with a wire brush or sandpaper.
Mix equal amounts of Resin and Hardener thoroughly until pool putty is uniform in color.
For above water repairs, pool putty can be contoured or smoothed by carefully rubbing with a wet sponge.
Note: It is important to apply Epoxybond Pool Putty at least 1/8" thick. After application, Epoxybond Pool Putty should not be disturbed until completely cured.
Pinch A Penny Pool Patio & Spa is your headquarters for pool and spa supplies & chemicals, chlorine tablets & shock products, toys, floats & swim gear, swimming pool pumps, motors & filters, automatic pool cleaners, pool heating systems, above-ground swimming pools and other swimming pool accessories. Franchise opportunities available in Texas, Louisiana and Mississippi with limited opportunities available in Florida, Georgia & Alabama. Pinch A Penny® is a registered trademark of Pinch A Penny, Inc. All other indicated registered ® trademarks are the property of the respective owners and the use hereof does not imply their approval or endorsement of Pinch A Penny® products.