Degreases Spa & Hot Tub Filters and Improves Filter Efficiency
Solus Filter Clean Spa Filter Cleaner is a liquid product that greatly improves spa filter life and efficiency. Solus Filter Clean is specially made to cleanse suntan oil and grease as well as scale and mineral deposits from spa filters of all types: cartridge, sand, and D.E. Regular use of Solus Filter Clean Spa Filter Cleaner will assure proper filtration for your spa or hot tub.
Solus Filter Clean Spa Filter Cleaner Directions for Use
When preparing or using Solus Filter Clean, take care not to splash, drip or use on surfaces such as ceramic, linoleum, formica brand counter surfaces, carpeting, etc., as etching or discoloration of these surfaces may take place. Solus Filter Clean is intended only for use as a spa filter cleaner.
Sand Filters: Turn off inlets and outlets for all chemical feeders. Close the main drain and place the filter in backwash position. Slowly add one quart of Solus Filter Clean through the strainer while back-washing. This product can also be added through the sand fill port. Run the filter until this product begins to come out of the backwash water or until the product is seen through a filter viewing cell. Soak the filter for 8-10 hours. After soaking, backwash the filter until the water comes out clean and the foam clears. Reverse the procedure and start normal filter operation. For sand filters containing more than 300 pounds of sand, add two quarts of Solus Filter Clean.
Cartridge Filters: Stop filter operation. Bleed off excess pressure through the filter safety valve. Open the filter unit, remove the cartridge from the filter, and rinse excess loose dirt with a water hose from top to bottom. Place the cartridge into a bucket and add one quart of product/five gallons water. Make sure the filter unit is completely covered by the cleaner. Soak 8-10 hours. After soaking, rinse with the hose at maximum pressure to remove excess filter cleaner or until foam residue is completely washed off. Re-install the cartridge and resume normal filter operation.
Diatomaceous Earth Filters: Stop filter operation. Bleed off excess pressure through safety valve. Remove filter elements (grids) from filter and rinse off excess dirt with a hose from top to bottom. Place grids in a bucket and add one quart of this product/5 gallons water. Make sure grids are fully immersed in cleaner. Soak 8-10 hours. After soaking, rinse out excess filter cleaner with the hose at maximum pressure. Re-install grid and add new filter media. Resume normal filter operation.
Pinch A Penny Pool Patio & Spa is your headquarters for pool and spa supplies & chemicals, chlorine tablets & shock products, toys, floats & swim gear, swimming pool pumps, motors & filters, automatic pool cleaners, pool heating systems, above-ground swimming pools and other swimming pool accessories. Franchise opportunities available in Texas, Louisiana and Mississippi with limited opportunities available in Florida, Georgia & Alabama. Pinch A Penny® is a registered trademark of Pinch A Penny, Inc. All other indicated registered ® trademarks are the property of the respective owners and the use hereof does not imply their approval or endorsement of Pinch A Penny® products.