Use before adding your EPA-registered chlorine which rids your pool of green, yellow, brown, and pink algae
No brushing required
Directions for Use
Turn on pool filter pump before application to circulate the water.
Shake well to break up the lumps (product lumping in transit is normal). Adjust the pool chemical balance to: 7.8 or higher for pH, 80-120 ppm for alkalinity, 25-75 ppm for cyanuric acid, and 2.0-2.5 ppm for chlorine.
Add 2 lbs. of Stop Green directly to the pool per 15,000 gallons of water. Spread half of along the perimeter of the pool, starting where the algae is thickest. Concentrate the balance of the application directly over the problem areas. Never add more than the recommended dose.
Wait 5 minutes. Then add 2.5 gallons of liquid chlorinating solution or 2 pounds granular shock directly to the pool per 15,000 gallons of water.
Circulate the pool water continuously for 24 hours using only the main drain, if possible. Repeat Step 4 by adding additional chlorine after 12 and 24 hours. Wait 24 hours before swimming.
Restore equipment and pool chemical balance to normal after the pool is clean.
Begin following a weekly maintenance dose of an all-purpose algaecide.
Pinch A Penny Pool Patio & Spa is your headquarters for pool and spa supplies & chemicals, chlorine tablets & shock products, toys, floats & swim gear, swimming pool pumps, motors & filters, automatic pool cleaners, pool heating systems, above-ground swimming pools and other swimming pool accessories. Franchise opportunities available in Texas, Louisiana and Mississippi with limited opportunities available in Florida, Georgia & Alabama. Pinch A Penny® is a registered trademark of Pinch A Penny, Inc. All other indicated registered ® trademarks are the property of the respective owners and the use hereof does not imply their approval or endorsement of Pinch A Penny® products.